Medium Frequency Generators - Basic Training I OPERATION
Medium Frequency Generators - Basic Training I OPERATION
This training course teaches the process of dismounting bearing inner rings from a shaft using MFT induction units, focusing on a 22kW 3.0 generator with a flexible inductor as an example
Mandatory course: Nein
Kategorie: 13,19
Kategorie alt: 1,4
Kategorie (Icon): 3. Instandhaltungslösungen & Services
Zielgruppe: Instandhalter
Level: Basic
Ort: 4
Sprache: 2
Icon-Sprache: English
Trainingsart: 1
Trainingsgebühren: Nein
Wissensgebiet: 1,3,4
Wissensgebiet alt: Instandhalter
Datum: Anytime
Dauer: 10 min
Materialnummer:
Trainer SAP Kürzel:
Herkunftsland_Trainer:
Zertifikat: Nein
Zertifikatsdatum:
Zertifikatsdatum 2:
Neu: Nein
Themenschwerpunkte (Zertifikat): - Preparations before the dismounting process
- Necessary safety measures
- Examples of winding the inductor on horizontal and vertical shafts
- Placement of the temperature sensor
- Dismounting process of bearing inner rings from a shaft with an MFT induction unit
- Important considerations during the process
- Necessary safety measures
- Examples of winding the inductor on horizontal and vertical shafts
- Placement of the temperature sensor
- Dismounting process of bearing inner rings from a shaft with an MFT induction unit
- Important considerations during the process
Themenschwerpunkte Modul Lubrication (Zertifikat):
Themenschwerpunkte Modul CM (Zertifikat):
Trainingsinhalt (Zertifikat) Trainingsmodul 3:
Certificate Version: 1.0
Ziel des Trainings: This course will show you how to operate MFT induction units. With the 22kW 3.0 generator and a flexible inductor as an example this training will teach you a complete dismounting process of bearing inner rings from a shaft. The training is kept general so it will also help when using other versions of the Schaeffler MFT induction unit. You will also learn about necessary safety measures and important considerations during the process.
Inhalt des Trainings: Preparations before the dismounting process
Necessary safety measures
Examples of winding the inductor on horizontal and vertical shafts
Placement of the temperature sensor
Dismounting process of bearing inner rings from a shaft with an MFT induction unit
Important considerations during the process
Necessary safety measures
Examples of winding the inductor on horizontal and vertical shafts
Placement of the temperature sensor
Dismounting process of bearing inner rings from a shaft with an MFT induction unit
Important considerations during the process
Zielgruppe Trainingsseite: Engineers, technicians, production foremen and shop floor personnel, maintenance and customer service
Beschreibungskategorie: Maintenance Products and Services - Maintenance Tools
Voraussetzungen: At least a 1.5 Mbps Internet speed as a minimum requirement (both upload and download speed)
Weitere Informationen: none
Trainingsbeschreibung Zusammenfassung: This training course teaches the process of dismounting bearing inner rings from a shaft using MFT induction units, focusing on a 22kW 3.0 generator with a flexible inductor as an example
Preis Kategorie: 1
Preis Kunde: Kostenlos
Preis Vertriebspartner: Kostenlos
Preis Service Provider: Kostenlos
Preis intern: Kostenlos
Kursbild2: On Demand
Suchparameter: M_MG26_EN